Pressure Washers

Kränzle 2160 TS

Kranzle 2160 standard equipment:

      • Integrated Roto-Mold trolley, manufactured out of
        one piece and therefore extremely stable and sturdy
        takes steps and rough ground in its stride
      • 5 m power lead with cable reel
      • Dirtkiller lance with stainless steel pipe
      • Adjustable and high pressure nozzle with stainless steel pipe
      • Receptacle for spray gun with safety cut-out
Kränzle 2160 TS
Operating pressure, continuously adjustable30 – 130 bar, Totalstop
Nozzle size25045 (Dirtkiller size: 045)
Motor Speed1400 r.p.m.
Max. admissible overpressure160 bar
Water output10.5 l/min
Water inlet temperatureMax. 60°C
Suction height2.5 m
Hose DrumNo
Total-Stop systemYes
Steel-weave high-pressure hose10 m
Detergent suckingyes
Connected load230 V~, 12.5 A, 50 Hz
Power input:P 1 – 3.2 kW
Power output:P 2 – 2.4 kW
Weight37 kg
Dimensions incl. pulling handle in mm375 x 360 x 900
Order No.417801

Kränzle 2160 TST PRESSURE WASHER

Integrated Roto-Mold trolley, manufactured out of one piece and therefore extremely stable and sturdy takes steps and rough ground in its stride
Integrated hose drum with 15 m steel fabric high-pressure hose
5 m power lead with cable reel
Dirtkiller lance with stainless steel pipe
Adjustable and high pressure nozzle with stainless steel lance
Receptacle for spray gun with safety cut-out
Main advantages of the Kränzle principle of arrangement are the integral hose drum, receptacles for HP gun, Dirtkiller and lance together with the winding-up device for the power cable. Everything is attached to the appliance, easily accessible and it can be used and operated without any problems.

Receptacle for spray gun with lance during breaks.
Operating pressure, continuously adjustable 30 – 130 bar, Totalstop
Nozzle size 25045 (Dirtkiller size: 045)
Motor Speed 1400 r.p.m.
Max. admissible overpressure 160 bar
Water output 10.5 l/min (630l/hr)
Water inlet temperature Max. 60°C
Suction height 2.5 m
Hose Drum Yes
Total-Stop system Yes
Steel-weave high-pressure hose 15 m
Detergent sucking yes
Connected load 230 V~, 12.5 A, 50 Hz
Power input: P 1 – 3.2 kW
Power output: P 2 – 2.4 kW
Weight 39.5 kg
Dimensions incl. pulling handle in mm 375 x 360 x 900

Kranzle 1152 TST

  • Integrated trolley
  • 5 m power lead
  • Cable reel
  • Hose drum with 15 m steel-weave high-pressure hose
  • Switch-off spray gun with handgrip
  • Vario-Jet spray lance with continuously adjustable jet from round to flat jet as well as high and low pressure
  • Dirtkiller Lance with stainless steel pipe
  • Continuously adjustable pressure and quantity control
  • Total stop function
  • Brass pump head
  • Ceramic-coated pump plungers
  • Dry-run safety
  • Receptacle for ‘M2000’ gun and lance
  • Detergent injector with filter
Kränzle 1152 TST
Operating pressure, continuously adjustable10 – 130 bar
Nozzle size25045 (Dirtkiller size: 045)
Max. Admissible overpressure150 bar
Water outputat 2800 r.p.m. 10 l/min
Inlet water temperature60°C
Suction height1 m
Hose drumyes
Steel-weave high-pressure hose15 m
Dirtkilleryes
Detergent injectoryes
Connected load230 V~, 50 Hz
Intensity of current12 A
Power inputP 1 – 2.8 kW
Power outputP 2 – 2.1 kW
Weight incl. accessories31.5 kg
Dimensions including handle in mm360 x 365 x 870
Order No. with Dirtkiller41 218 1
therm c pressure washers wexford and carlow

Therm C 11/130

Kränzle therm C standard equipment:

    • Integrated trolley
    • 7.5 m power lead
    • Cable reel
    • 10 m steel-weave high-pressure hose; with hose drum 15 m
    • Total-Stop facility with delayed motor cut-out
    • 4-way safety system with overload protection
    • Continuously adjustable temperature control
    • Continuously adjustable pressure control from outside the machine
    • Integrated steam level
    • Pre-aeration of combustion chamber
    • 25 l fuel tank with content monitoring
    • Brass pump head
    • Dry-run safety
    • Ceramic-coated pump plungers
    • Spray gun with safety cut-out
    • Spray lance with stainless steel pipe
    • Receptacle for spray gun, lance and Dirtkiller
    • Detergent injector with filter
Technical Data Therm C 11/130
 
Operating pressure, fully adjustable30 – 130 bar
Max. admissible overpressure145 bar
Water output11 l/min (660l/hr)
Hot water output temerature (water supply 12ºC)12 – 80 °C
Steam levelmax. 140 °C
Nozzle size, flat jet nozzle25045
Motor Speed1400 r.p.m.
Heating oil consumption at max heating output5.1 kg/h (6.1 l/h)
Heating oil consumption at T 45°C3.2 kg/h (3.8 l/h)
Heating Output55 kW
Fuel Tank Capacity Monitoring25 l
Connect Load230V / 50Hz / 15.0A
Power Intake3.4 kW
Output2.3 kW
Weight179 kg
Dimensions in mm without hose drum790 x 590 x 980
Order No with Hose Drum41.442 1
Order No without Hose Drum41.442

Standard Equipment:

  • PTO shaft
  • 30ft hydraulic hose
  • Quick release coupling
  • Chemical injector
  • Operating Pressure = 3000 psi
  • Delivery Rate = 13L/min @ 540 RPM OR 21L/min @ 1000 RPM

Optional Extras:

  • Reel complete with a maximum length of 135ft 3/8″ hose
  • Gearbox in a ratio of 2:1

Standard Equipment:

  • 8m hydraulic hose
  • 700ml high pressure lance
  • 6.5 and 13HP Honda engine driven washers
  • Diesel Yanmar also available
  • 6.5HP come standard with WS 154 Interpump
  • 13HP come standard with WS 201 Interpump

Optional Extras:

  • Quick release couplings
  • Turbo nozzle